Body:
DMC, flame retardant glass fibre reinforced
polyester compression moulded.
Added glass fibre scrim for impact strength.
Control Gear Tray:
The white epoxy powder coated steel control
gear tray carries the control gear and
lampholders, and also acts as a reflector.
Two nylon cords allow the gear tray to be
suspended from the body during installation
and service.
Lamps:
Only G13 Bi-pin type Lamps are suitable.
Clip:
Double acting. Stainless steel clips.
Control Gear:
Switch Start and semi electronic start.
Alternatively Electronic 0 to 60Hz 230V.
Ex n switch start with multipulse electronic
starters, zone 2. Safety cut out feature
prevents lamp flicker and extends lamp life.
|
Emergency mode:
36 Watt only. Rechargeable nickel cadmium
cells and an inverter charger can be fitted
within the body of the luminaire: The circuit
would be maintained.
Cable Entry:
Standard Single entry with No. 0
Compression gland for cable diameter
6-11 mm. Two entry or metal glands for
armoured cable are extra.
Terminal connection 4mm².
Lens:
Injection moulded polycarbonate with
internal linear prism.
Control Gear Code:
SS Switch Start
SES Semi Electronic Start
ELB Electronic Choke Zone2.
|
