 |
 LED
PRODUCTS
:: LED
NBG 48 LED
N20-20 LED
 |
|
 |
 |
This range of Bulkhead Luminaires has been designed to satisfy a wide range of Industrial and Architectural
applications. The light distribution allows it to be used as a standard bulkhead, lowbay or streetlight.
The temperature limitations of the electronic components limit the ambient temperature to –20 to +40°C
|
|
|
Body:
High Pressure Die Cast thin wall LM 6 Aluminium finished with a polyester powder coating.
Lens:
A flat smooth toughened glass lens is mounted into an aluminum frame. The flat glass prevents dust
build up and is easily cleaned by spraying.
The frame is attached to the body by 6 spring stainless steel clips and hinges from one side.
Gasket:
Round silicone sponge gasket is retained within a recess in the cast aluminium base to ensure total sealing
and an IP65 rating.
Control gear:
Four electronic constant current LED drivers power the 48 LED’s at 350mA . The total circuit wattage
of the unit is 60 W.
Mounting:
Four 8mm mounting brackets with holes attached to the rear of the base allow many choices of alignment.
Options include wall ceiling brackets. Angled wall brackets. Anti-vibration mountings, pole mounting
brackets and an angled post-top bracket.
Entries:
Provision is made for four gland entry positions . The bulkhead is supplied with one entry threaded
20mm, and supplied complete with gland.
|
 |
|
|
© 2004 Nordland Lighting. All Rights Reserved.
Design and Development by Fyre Interactive
|
|
 |
 |
