Body: DMC, glass fibre reinforced polyester compression moulded.
Control Gear: Lampholders are made from polycarbonate and are bi-pin rotalock action type suitable
for use with both 26 mm and 38 mm diameter lamps. The control gear is HPF corrected. Either switch
start, Semi-Electronic start, rapid start or electronic control gear is available. Voltage options are 230 and
110 V AC and also DC.
Cold Room: The luminaires can be fitted with starters to enable it to be used in cold rooms to – 20 OC, and
freezer rooms to -40 OC with polycarbonate lens.
Entries: Two 20 mm diameter cable entries are provided for through wiring. Plugs are supplied for
blanking off. Glands are not provided.
Emergency Gear: Nickel cadmium rechargeable cells together with an inverter can be incorporated into
the luminaire to supply emergency lighting for 1 hour at either 50% or 100% output. Either maintained or
non-maintained modes are available as options.
Lens: Injection moulded clear with linear internal prism.
Abbrevations:
U – Ultra High Impact Acrylic.
P – Polycarbonate Diffuser.
SS – Switch Start Control Gear suitable for 26 mm and 38 mm lamps.
RS – Rapid Start Ballast, only 38 mm lamps suitable.
SES – Semi-Electronic start ballast, only 38 mm lamps suitable.
ECG – Electronic control gear, only 26 mm lamps suitable.
IP Rating: IP 65.
Clips: Polyamide. Stainless steel optional extra, also vandal resistant s/s clips.
|
